Choose a different country or region to view content for your location

WIDOCRYL-WT

WIDOCRYL-WT

With correct priming, WIDOCRYL-WT adheres to almost any surface.

Important note for application of the WIDOCRYL-WT:

The PD-Powder is mixed into the fluid component WIDOCRYL-WT (mixing ratio: PD-Powder 1kg : WIDOCRYL-WT 2kg – This equals 1.9 l finished mixture).

To make sure that the material will cure properly, each layer thickness should not exceed 25 mm.

Further details, especially regarding hazard statements, security advices and measures in the event of fire can be found in the safety data sheet under sections 2, 4, 5, 6, 7 and 8. 

Please also refer to our technical information sheets.

Technical characteristics (cured state) 

(Sample tested at +20°C)
Tensile strength:                    5.0 MPa
Elongation:                              330%
Modulus of elasticity:           8.3 MPa
Dynamic crack-bridging:       > 5 mm

Samples kept at –30°C for 24 hours before testing

Tensile strength:                    4.3 MPa
Elongation:                              315%
Modulus of elasticity:           225 MPa
Dynamic crack-bridging:       > 5 mm

Download pdf