Methyl methacrylate resin plus powder
2,1 kg/m² per cm layer thickness
at +20°C approx. 15 min.
Curing time with hardener (at +20° C )
approx. 30 min., Fully loadable after 1 hour.
Minimum layer thickness
> 80 MPa
Powder component 17,8 kg bag, Liquid hardener 2,2 kg metal can
Minimum working temperature
Maximum working temperature
Cleaning in fresh condition
If container is kept closed and storage temperature held constantly between +15°C and +20° C the product may be used for up to 6 months.
The surface must be dry, clean, free from grease and dust. Adhesive interfering substances have to be
removed. Absorbent surfaces must be primed with WIDOCRYL-Primer PM and sprinkled with quartz sand before applying the WIDOCRYL-Mortar. This prevents that the resin binder is absorbed by the porous substrate, which could disturb the polymerisation process and it also improves the adhesion.
The powder has to be mixed with the hardening fluid to a homogeneous mortar (mixing ratio: Powder: 900ml, Hardener fluid: 200l) for approx. 2 min. and can then be applied to the surface with a trowel. The minimum layer thickness is 6 mm. If a layer thickness of 25 mm or more is required, a second layer has to be applied.
Should the mixture according to the given amounts seem to be too thin, up to 15% (referring to the total mixture) of PD-Powder can be added.
WIDOCRYL-Mortar is highly inflammable and should be kept away from all ignition and heat sources. The mixing device, as well as all other electronic devices used at the building site, has to be ex-protected.